Today's work at the Lab...

begin:vcard
fn;quoted-printable:Carlos Gonz=C3=A1lez Avelino
n;quoted-printable:Gonz=C3=A1lez Avelino;Carlos
email;internet:A00466801@itesm.mx
note;quoted-printable:Ingenier=C3=ADa en Tecnolog=C3=ADas Electr=C3=B3nicas 8o. Semestre
version:2.1
end:vcard

Today Laura, Arturo and I went to the lab to continue testing Pio and
Nero but the converter Arturo bought was only from mini-IDE to IDE and
he also brought a converter from IDE to USB, unfortunately both
converters need power to work which the first one has but the second one
didn't so Arturo has to look for it and bring it tomorrow so we can
finish checking Nero.

Pio is already working except for the USB port in the laser, to check
that we need Luis and Carlos L. to help us because they have more
experience in such matters. We assigned some tickets in Assembla because
we need some stuff to continue working.

We agreed now the highest priority task is to get both robots up and
running and to do that we need:

1. Get another charger for the batteries.
2. Make the backup image for Pio.
3. Check the HD of Nero.
4. If the HD is working properly then make a backup image of it, if not
then look for another HD to replace it and install everything on it.

We checked the three chargers and they are working properly, checked the
power source teacher Marissa told us she would check and repair but
apparently she didn't so we can't use it as another charger. We're
making progress but once again the issue of the batteries will probably
slow us down.

Cheers!